噴漿沸騰造粒機

ZLFL連續式沸騰制粒機

文字:[大][中][小] 手機頁面二維碼 2019-5-21     瀏覽次數:    

ZLFL連續式沸騰制粒機

  ZLFL連續式沸騰制粒機

  熱風進入流化床底部使物料呈流化狀。粘結劑由泵送到霧化噴嘴,霧化后涂布于流化顆粒表面或使顆粒相互粘結,經不斷地流化、涂布、干燥,顆粒逐漸長大,達到所要求的粒度后從流化床出料口排出。流化、霧化產生的細粉,由旋風分離器回收后,重新加入到噴霧造粒流化床中,成為新顆粒的核心,實現流化床內顆粒數的平衡。噴霧、造粒、干燥在同一設備中完成。

  ZLFL Continuous boiling granulator

  The hot air enters the bottom of the fluidized bed so that the material is fluidized.Binder is pumped into the atomizing nozzle,atomization and then coated on the surface of the fluidized particles or particles are bonded to each other,by continuous flow,coating and drying,the particles grow up,to achieve the required size is discharged from the outlet of the fluidized bed.The fine powder produced by fluidization and atomization is recovered by cyclone separator and then added to spray granulation fluidized bed to become the core of new particle and realize the balance of particle number in fluidized bed.Spraying,granulation and drying are completed in the same equipment.

返回上一步
打印此頁
13955004007
瀏覽手機站
湖北30选5开奖结果走势图